P6 light-duty pull-off tester(0.6~6KN)
A compact pull-off tester designed for practical on-site adhesion and pull-off verification. It uses an integrated display-and-host structure for quick startup and efficient field operation without complicated setup.
P10 Portable pull-off tester(0~10KN)
A pull-off tester developed for adhesion and pull-out verification in construction inspection. It is suitable for checking bonding strength of insulation systems, anchoring components, and related plate or coating interfaces.
PA10 Automated portable pull-off tester with digital system(0~10KN)
An automated pull-off tester designed for adhesion and rivet pulling force evaluation in construction quality inspection. It is suitable for testing bonding performance of thermal insulation systems, mortar layers, and related building materials.
P16 general-purpose pull-off tester(1.6-16KN)
A multifunctional pull-off tester for bonding strength evaluation of mortar, asphalt, tiles, coatings, and protective layers. Its compact integrated design supports convenient field testing with stable mechanical output.
P25 general-purpose pull-off tester(2.5-25KN)
A multifunctional pull-off tester designed for bonding strength verification of mortar, asphalt, tiles, coatings, and protective layers. It provides practical field performance with an integrated hydraulic and digital measurement structure.
P50 Heavy-duty professional pull-off tester(5-50KN)
A pull-off tester used for concrete-related adhesion and anchorage force evaluation. It is suitable for non-destructive testing workflows involving bond strength checks, anchor retention assessment, and practical field verification.
APT50 Anchor Pull-out Tester(0-50KN)
A compact anchor pull-out tester for on-site anchorage verification. It is suitable for testing anchors, rebars, and expansion bolts, and can also support tensile checks for curtain wall fixing points.
APT100/200/300/500/1000 Anchor Pull-Out Tester(0-1000KN)
APT100/200/300/500/1000 series anchor pull-out testers for high-load anchorage verification.
AT10-M Hydraulic Adhesion Tester
A portable adhesion tester for pull-off strength verification of coatings and bonded layers. It is suitable for both laboratory and on-site testing with stable hydraulic output and compact handheld operation.
SJY-800B Penetration Strength Tester
A penetration strength tester for rapid on-site evaluation of mortar and related masonry materials. It helps estimate compressive strength by correlating penetration depth with standardized strength curves.
SJY-1000B Penetration Strength Tester
A penetration strength tester for fast non-destructive strength checks in mortar and masonry applications. It supports efficient field testing and compressive strength estimation through penetration value conversion.